• Motor gearboxes are maintenance-free, compact power resources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase options for your individual needs.
• Key feature of the drives are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-installed gear motors are total electromechanical drives where the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are high performance and durable and feature a compact and lightweight design.
The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent fat loss compared to commercially obtainable drive motors. This is accomplished through the consistent application of aluminium die casting technology, which guarantees a high amount of rigidity for the gear and motor housing at the same time.
Each drive is produced and tested particularly for each order and customer. A advanced modular system permits a great diversity of types and a optimum degree of customization to consumer requirements.
Because of their integrated control units, the shaft-mounted gear motors will be the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are secured by two position limit switches. This uncomplicated alternative does not only simplify the cabling, but also can help you configure the finish positions quickly and easily. The high shut-off accuracy of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a 
gearbox, an electric motor, and limit switches. It really is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electrical panel, it can run and stop after set amount of turns. Then it can open up and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment inside a greenhouse, environment control systems are a necessity. Numerous mechanical systems can be applied in this respect; however cup vent drive systems tend to be the most popular. The drive system includes a central gearmotor connected to a 40:1 correct angle reducer with dual result shafts. These OP shafts hook up to lengthy jack shafts that spread across the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open up and close large cup windows panes in the ceiling for temperature control.
With respect to the size of the application (amount of the shafting, amount and weight of the windowpane panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are rated continuous since the glass pane windows may potentially be under constant, subtle adjustment during the day.
Gear Motor, also known as Electric motor Gearboxes, is a specific type of electrical motor that is designed to produce high torque whilst maintaining a low horsepower, or low swiftness, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural market, our motors are available options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment errors and can be very easily removed without disturbing the whole shaft.
shaft-mounted gear motors are comprehensive electromechanical drives in which the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are high performance and durable and show a compact and lightweight design.
Do you have any suggestions on the greenhouse gear motor, please do not think twice to contact us.